Category Archives: 70-411 Dumps

[2016-New] 100% Pass Lead2pass 70-411 Practice Test Free Version [435-440]

2016 July Microsoft Official New Released 70-411 Q&As in!

100% Free Download! 100% Pass Guaranteed!

Amazing,100% candidates have passed the 70-411 exam by practising the preparation material of Lead2pass, because the braindumps are the latest and cover every aspect of 70-411 exam. Download the braindumps for an undeniable success in 70-411 exam.

Following questions and answers are all new published by Microsoft Official Exam Center:

You have a server named Server1 that is a number of a domain named
You view the properties of a service on Server1 as shown in the graphic. 

Use the drop-down menus to select the answer choice that completes each statement.
NOTE: Each correct selection is worth one point. 


Virtual accounts are "managed local accounts" that provide the following features to simplify service administration:
– No password management is required.
– The ability to access the network with a computer identity in a domain environment.
Virtual accounts require very little management. They cannot be created or deleted, nor do they require any password management.
You must be a member of the Administrators group on the local computer to perform the following procedures. To configure a service to use a virtual account:
– Click Start, point to Administrative Tools, and then click Services.
– In the details pane, right-click the service that you want to configure, and then click Properties.
– Click the Log On tab, click This account, and then type NT SERVICE\ServiceName. When you are finished, click OK.
– Restart the service for the change to take effect.

You have a Windows Server Update Services (WSUS) server named Server1.
Server1 synchronizes from Microsoft Update.
You plan to deploy a new WSUS server named Server2. Server2 will synchronize updates Server2 will be separated from Server1 by a firewall from Server1.
You need to identify which port must be open on the firewall so that Server2 can synchronize the updates.
Which port should you identify?

A.    8530
B.    3389
C.    443
D.    80

Answer: A
WSUS upstream and downstream servers will synchronize on the port configured by the WSUS Administrator. By default, these ports are configured as follows:
On WSUS 3.2 and earlier, port 80 for HTTP and 443 for HTTPS
On WSUS 6.2 and later (at least Windows Server 2012), port 8530 for HTTP and 8531 for HTTPS The firewall on the WSUS server must be configured to allow inbound traffic on these ports.

A technician installs a new server that runs Windows Server 2012 R2.
During the installation of Windows Server Update Services (WSUS) on the new server, the technician reports that on the Choose Languages page of the Windows Server Update Services Configuration Wizard, the only available language is English.
The technician needs to download updates in French and English.
What should you tell the network technician to do to ensure that the required updates are available?

A.    Complete the Windows Server Update Services Configuration Wizard, and then modify the update language on the server.
B.    Uninstall all instances of the Windows Internal Database.
C.    Change the update languages on the upstream server.
D.    Change the System Local of the server to French.

Answer: C
Configure upstream servers to synchronize updates in all languages that are required by downstream replica servers.
You will not be notified of needed updates in the unsynchronized languages.
The Choose Languages page of the WSUS Configuration Wizard allows you to get updates from all languages or from a subset of languages. Selecting a subset of languages saves disk space, but it is important to choose all the languages that are needed by all the downstream servers and client computers of a WSUS server.
Downstream servers and client computers will not receive all the updates they need if you have not selected all the necessary languages for the upstream server. Make sure you select all the languages that will be needed by all the client computers of all the downstream servers.
You should generally download updates in all languages on the root WSUS server that synchronizes to Microsoft Update. This selection guarantees that all downstream servers and client computers will receive updates in the languages that they require.
To choose update languages for a downstream server:
If the upstream server has been configured to download update files in a subset of languages:
In the WSUS Configuration Wizard, click Download updates only in these languages (only languages marked with an asterisk are supported by the upstream server), and then select the languages for which you want updates.

Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series.
Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question.
Your network contains an Active Directory domain named
The domain contains more than 100 Group Policy objects (GPOs).
Currently, there are no enforced GPOs.
You have a GPO named GPO1 that is linked to the domain.
You need to configure GPO1 to apply settings to Group1 only.
What should you use?

A.    Dcgpofix
B.    Get-GPOReport
C.    Gpfixup
D.    Gpresult
E.    Gpedit. msc
F.    Import-GPO
G.    Restore-GPO
H.    Set-GPInheritance
I.    Set-GPLink
J.    Set-GPPermission
K.    Gpupdate
L.    Add-ADGroupMember

Answer: C

Your network contains one Active Directory forest named
You create a starter Group Policy object (GPO) named Starter_GPO1.
From the Delegation tab of Starter_GPO1, you add a group named GPO_Admins and you assign the Edit settings permissions to the group.
You create a new GPO named GPO1 from Starter_GPO1.
You need to identity which action can he performed by the members of the GPO Admins group.
What should you identify?

A.    Modify the Delegation settings of Starter_GPO1.
B.    Modify the Group Policy Preferences in Starter_GPO1.
C.    Link a WMI filter to GPO1.
D.    Modify the Administrative Templates in GPO1.

Answer: A
Permission rights applied to starter GPO objects are relative to the starter GPO objects only; they are not inherited from actual GPOs created from starter GPOs.
B is wrong because Starter GPOs do not have preferences, only Administrative Template policy settings.

You can pass Microsoft 70-411 exam if you get a complete hold of 70-411 braindumps in Lead2pass. What’s more, all the 70-411 Certification exam Q and As provided by Lead2pass are the latest.

2016 Microsoft 70-411 exam dumps (All 447 Q&As) from Lead2pass: [100% Exam Pass Guaranteed]

[2015 New Updated] Latest Microsfot 70-411 Exam Questions with PDF and VCE 100% Pass Gurantee

Uesd latest updated 70-411 new questions, total 442 Q&As. Just pass the exam more than 9xx/1000 scores.

You have a group managed Service Account name Account01.
Only three servers named Server01, Server02 and Server03 are allowed to use Account01 service account.
You plan to decommission Server01.
You need to prevent Server01 from using the Account01 service account.
The solution must ensure that Server02 and Server03 continue to use the Account01 service account What command should you run? To answer, select the appropriate options in the answer area.

Read more

Real Microsoft 70-411 Exam Dumps From Lead2pass With New Added Questions For Free Download (131-140)

Lead2pass has published the new version of Lead2pass Microsoft 70-411 301q exam questions with free download vce and pdf format. Moreover, they are based on the recommended syllabus covering all the 70-411 exam questions. Our team of Microsoft expert professionals have been timely updated the exam dumps, Visit the site lead2pass to get more information!

Your network contains an Active Directory domain named All domain controllers run Windows Server 2012 R2. An organizational unit (OU) named OU1 contains 200 client computers that run Windows 8 Enterprise. A Group Policy object (GPO) named GPO1 is linked to OU1.
You make a change to GPO1.
You need to force all of the computers in OU1 to refresh their Group Policy settings immediately. The solution must minimize administrative effort.
Which tool should you use?

Read more

[NEW UPDATED QUESTIONS]All Latest Updated Questions and Answers Of 70-411 301q Real Exam Dumps For Free Download On Lead2pass (1-10)

Attention:Professional new version 70-411 PDF and VCE can now free download on, all are updated recently by our experts covering all aspects of the 70-411 exam. 100 percent pass your exam.

Your network contains an Active Directory domain named
The domain contains a domain controller named DC1 that runs Windows Server 2012 R2.
All client computers run Windows 8 Enterprise. DC1 contains a Group Policy object (GPO) named GPO1.
You need to deploy a VPN connection to all users.
What should you configure from Users Configuration in GPO1?

Read more

Free Download Latest 2014 Pass4sure&Lead2pass Microsoft 70-411 Exam Questions (251-260)

Your network contains an Active Directory domain named The domain contains a RADIUS server named Server1 that runs Windows Server 2012 R2. You add a VPN server named Server2 to the network. On Server1, you create several network policies. You need to configure Server1 to accept authentication requests from Server2. memory resources and processor resources each?

A.    Add-RemoteAccessRadius
B.    New-NpsRadiusClient
C.    Remote Access Management Console
D.    Routing and Remote Access

Answer: B
There are two configurations need to be done in Server1. First is to create a RADIUS client, and second, create a network policy. The network policy has been created. So we need to use New-NpsRadiusClient to create a RADIUS client.

Read more

Free Download Latest 2014 Pass4sure&Lead2pass Microsoft 70-411 Exam Questions (241-250)

You have a DNS server named Server1 that runs Windows Server 2012 R2. On Server1, you create a DNS zone named You need to specify the email address of the person responsible for the zone. Which type of DNS record should you configure?

A.    Start of authority (SOA)
B.    Mail exchanger (MX)
C.    Host information (HINFO)
D.    Mailbox (MB)

Answer: A

Read more

Free Download Latest 2014 Pass4sure&Lead2pass Microsoft 70-411 Exam Questions (231-240)

Hotspot Question
Your network contains an Active Directory domain named You need to create a certificate template for the BitLocker Drive Encryption (BitLocker) Network Unlock feature. Which Cryptography setting of the certificate template should you modify? To answer, select the appropriate setting in the answer area.




Read more

Free Download Latest 2014 Pass4sure&Lead2pass Microsoft 70-411 Exam Questions (221-230)

Hotspot Question
Your network contains an Active Directory domain named The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Windows Server Update Services server role installed. You need to use the Group Policy object (GPO) to assign members to a computer group. Which setting should you configure in the GPO? To answer, select the appropriate setting in the answer area.


Client-side targeting involves automatically assigning the computers by using either Group Policy or registry keys. Second, create the computer group in WSUS. Third, move the computers into groups by using whichever method you chose in the first step.

Read more

Free Download Latest 2014 Pass4sure&Lead2pass Microsoft 70-411 Exam Questions (211-220)

Your network contains an Active Directory domain named The domain controllers in the domain are configured as shown in the following table.

You deploy a new domain controller named DC3 that runs Windows Server 2012 R2. You discover that you cannot create Password Settings objects (PSOs) by using Active Directory Administrative Center. You need to ensure that you can create PSOs from Active Directory Administrative Center. What should you do?

A.    Raise the functional level of the domain.
B.    Upgrade DC1.
C.    Transfer the infrastructure master operations master role.
D.    Transfer the PDC emulator operations master role.

Answer: A
Fine-grained password policies allow you to specify multiple password policies within a single domain so that you can apply different restrictions for password and account lockout policies to different sets of users in a domain. To use a fine-grained password policy, your domain functional level must be at least Windows Server 2008. To enable fine-grained password policies, you first create a Password Settings Object (PSO). You then configure the same settings that you configure for the password and account lockout policies. You can create and apply PSOs in the Windows Server 2012 environment by using the Active Directory Administrative Center (ADAC) or Windows PowerShell.
Step 1: Create a PSO
Applies To: Windows Server 2008, Windows Server 2008 R2

Read more

Pages: 1 2 3 4
1 2 3 4