Free Download Microsoft 70-643 PDF Full Version Now (141-150)

QUESTION 141
Your network contains a server named Server1 that has two volumes named C and D. You add a new volume. What should you do?

A.    From Disk Management, create a volume mount point.
B.    From Disk Management, attach a virtual hard disk (VHD).
C.    At the command prompt, run the diskraid.exe command and specify the /v parameter.
D.    At the command prompt, run the dism.exe command and specify the /mount-wim parameter.

Answer: A
Explanation:
Assign a mount point folder path to a drive You can use Disk Management to assign a mount-point folder path (rather than a drive letter) to the drive. Mount-point folder paths are available only on empty folders on basic or dynamic NTFS volumes. Backup Operator or Administrator is the minimum membership required. Assigning a mount-point folder path to a drive 1. In Disk Manager, right-click the partition or volume where you want to assign the mount- point folder path, and then click Change Drive Letter and Paths.
2. Do one of the following:
To assign a mount-point folder path, click Add. Click Mount in the following empty NTFS folder , type the path to an empty folder on an NTFS volume, or click Browse to locate it. To remove the mount- point folder path, click it and then click Remove.
Additional considerations If you are administering a local or remote computer, you can browse NTFS folders on that computer. When assigning a mount-point folder path to a drive, use Event Viewer to check the system log for any Cluster service errors or warnings indicating mount point failures. These errors would be listed as ClusSvc in the Source column and Physical Disk Resource in the Category column.
Source: http://technet.microsoft.com/en-us/library/cc753321.aspx

QUESTION 142
You start Server1 by using a Microsoft Windows Preinstallation Environment (Windows PE) image. You copy a virtual hard disk (VHD) image named VHD1 to Server1. VHD1 contains a Windows Server 2008 R2 image. You need to configure Server1 to start from VHD1. Which tool should you use?

A.    Bcdedit
B.    Bootcfg
C.    Diskpart
D.    Dism

Answer: A
Explanation:
To add a native-boot VHD to an existing Windows 7 boot menu If you are deploying the VHD to a computer with an existing Windows 7 or Windows ServerR 2008 R2 installation, you can use the BCDedit tool to make the new VHD bootable and add it to the boot menu. For more information about using the BCDedit tool, see this Microsoft Web site. 1. Copy an existing boot entry for a Windows 7 installation. You will then modify the copy for use as the VHD boot entry. At a command prompt, type:
bcdedit /copy {default} /d "vhd boot (locate)" When the BCDedit command completes successfully, it returns a {GUID} as output in the Command Prompt window. 2. Locate the {GUID} in the command-prompt output for the previous command. Copy the GUID, including the braces, to use in the following steps. 3. Set the device and osdevice options for the VHD boot entry. At a command prompt, type: bcdedit /set {guid} device vhd=[locate]\windows7.vhd bcdedit /set {guid} osdevice vhd=[locate]\windows7.vhd 4. Set the boot entry for the VHD as the default boot entry. When the computer restarts, the boot menu will display all of the Windows installations on the computer and boot into the VHD after the operating-system selection countdown completes. At a command prompt, type:
bcdedit /default {guid}
5. Some x86-based systems require a boot configuration option for the kernel in order to detect certain hardware information and successfully native-boot from a VHD. At a command prompt, type:
bcdedit /set {guid} detecthal on

QUESTION 143
Your network contains a server named Server1 that runs Windows Server 2008 R2. You add a new 3- terabyte hard disk to Server1. You need to create a 3-terabyte volume. What should you do first?

A.    Disable write caching for the hard disk.
B.    Initialize the disk as a Master Boot Record (MBR) disk.
C.    Initialize the disk as a GUID Partition Table (GPT) disk.
D.    Disable direct memory access (DMA) for the hard disk controller.

Answer: C
Explanation:
A GPT disk uses the GUID partition table (GPT) disk partitioning system. A GPT disk offers these benefits: Allows up to 128 primary partitions. Master Boot Record (MBR) disks can support up to four primary partitions and an additional 124 partitions inside extended partitions. Allows a much larger partition size–greater than 2 terabytes (TB), which is the limit for MBR disks. Provides greater reliability because of replication and cyclical redundancy check (CRC) protection of the partition table can be used as a storage volume on all x64-based platforms, including platforms running Windows XP Professional x64 Edition. Starting with Windows Server 2003 SP1, GPT disks can also be used as a storage volume on x86- based Windows platforms. Can be used as a boot volume on x64- based editions of Windows 7, Windows Vista, and Windows Server 2008. Starting with Windows Server 2003 SP1, GPT disks can also be used as a boot volume on Itaniumbased\ systems. Note:
Windows only supports booting from a GPT disk on systems that contain Unified Extensible Firmware Interface (UEFI) boot firmware.
Source: http://www.microsoft.com/whdc/device/storage/GPT-on-x64.mspx

QUESTION 144
Your network contains a server named Server1 that runs Windows Server 2008 R2. You install three new hard disk drives on Server1. The drives are identical in size. You need to create a volume by using the three new disk drives.
The volume must meet the following requirements:
?Provide the maximum amount of usable storage.
?Provide the fastest read/write performance available.
Which type of volume should you create?

A.    mirrored
B.    RAID-5
C.    spanned
D.    striped

Answer: D
Explanation:
RAID 0 – Striped
+ Fast, reads and writes to all disks at the same time + Flexible, can be used with any number of disks
+ Cheap, uses all disks in the array for data.
– Non redundant
– Dangerous: failure risk increases with every disk added to the array. If one disk failes all data is lost.
RAID 1 – Mirrored
– Slow, needs to write the same data to all disks,
– Inflexible, needs an even number of disks.
– Costly, only 50% of the available total disk space can be used (the other 50% is used for the mirror) + Redundant
+ Safe
RAID 5 – Striped with distributed parity
+ Fast, reads and writes to all – 1 disks at the same time + Flexible, can be used with any number of disks, but needs atleast 3. + Less expensive, uses all – 1 disks in the array for data. Penalty is max 33%, penalty shrinks with every disk added to the array.
+ Redundant
+ Safe
Spanned – Just a Bunch Of Disks
– Slow, writes to one disk, untill it is filled up.
+ Flexible, can be used with any number of disks
+ Cheap, used all disks in the array for data.
– Non redundant
– Dangerous: failure risk increases with every disk added to the array. If one disk failes all data may be lost.

QUESTION 145
Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the following Remote Desktop Services (RDS) role services installed:
– Remote Desktop Session Host (RD Session Host)
– Remote Desktop Web Access (RD Web Access)
You publish 10 RemoteApp programs on Server1 by using RD Web Access. You need to ensure that when users log on to the RD Web Access page, they see only the RemoteApp programs assigned to them. What should you modify from RemoteApp Manager?

A.    the properties of each RemoteApp program
B.    the RD Gateway Settings
C.    the RDP Settings
D.    the RD Session Host Server Settings

Answer: A

QUESTION 146
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 and a client computer named Computer1. Server1 runs Windows Server 2008 R2. Computer1 runs Windows 7. Server1 has the Remote Desktop Session Host (RD Session Host) role service and the Remote Desktop Web Access (RD Web Access) role service installed. You need to ensure that new RemoteApp programs published on Server1 are automatically added to the Start menu on Computer1. What should you do?

A.    From RemoteApp and Desktop Connections on Server1, set up a new connection.
B.    From RemoteApp and Desktop Connections on Computer1, set up a new connection.
C.    From RemoteApp Manager on Server1, create an .rdp file. Deploy the .rdp file to Computer1.
D.    From RemoteApp Manager on Server1, create a Windows Installer package. Deploy the package to Computer1.

Answer: B
Explanation:
RemoteApp and Desktop Connection In Windows Server 2008, Terminal Services introduced RemoteApp programs, which are programs that are accessed remotely through Remote Desktop Services and appear as if they are running on the end user’s local computer. In Windows Server 2008 R2, Remote Desktop Services provides administrators the ability to group and personalize RemoteApp programs as well as virtual desktops and make them available to end users on the Start menu of a computer that is running WindowsR 7. This new feature is called RemoteApp and Desktop Connection. RemoteApp and Desktop Connection provides a personalized view of RemoteApp programs, session-based desktops, and virtual desktops to users. When a user starts a RemoteApp program or a session-based desktop, a Remote Desktop Services session is started on the Remote Desktop Session Host (RD Session Host) server that hosts the remote desktop or RemoteApp program. If a user connects to a virtual desktop, a remote desktop connection is made to a virtual machine that is running on a Remote Desktop Virtualization Host (RD Virtualization Host) server. To configure which RemoteApp programs, session-based desktops, and virtual desktops are available through RemoteApp and Desktop Connection, you must add the Remote Desktop Connection Broker (RD Connection Broker) role service on a computer that is running Windows Server 2008 R2, and then use Remote Desktop Connection Manager.
In Windows 7 and Windows Server 2008 R2, you configure RemoteApp and Desktop Connection by using Control Panel. After RemoteApp and Desktop Connection is configured, RemoteApp programs, session-based desktops, and virtual desktops that are part of this connection are available to users on the Start menu of their computer. Any changes that are made to RemoteApp and Desktop Connection, such as adding or removing RemoteApp programs or virtual desktops, are automatically updated on the client and on the Start menu.
Source: http://technet.microsoft.com/en-us/library/dd560650(WS.10).aspx Step-by-Step Client configuration of a RemoteApp and Desktop Connection web feed via the control panel.
The first step is to open the RemoteApp and Desktop Connection Applet:

Click on the link to "Set up a new connection …"

Specify the URL for the web feed:

Click Next and confirm your selection:

You receive confirmation that the connection was successfully added:

 

And you can then see the connection in the applet:

If you click on the Properties button, you can see the connection’s details and you also have an "Update Now" button that you can use to manually update the list of RemoteApps and Desktops:

Source: http://blogs.technet.com/b/askperf/archive/2009/10/14/windows-7-windows-server- 2008-r2-remoteapp-and-desktop-connection.aspx

QUESTION 147
Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the Remote Desktop Gateway (RD Gateway) role service installed. You add the Domain Users group to a connection authorization policy named TS_CAP_01. You need to ensure that only client computers that have Windows Firewall enabled can connect to Remote Desktop resources through the RD Gateway. What should you do?

A.    From Remote Desktop Gateway Manager, modify the properties of the TS_RAP_01 resource authorization
policy.
B.    From Remote Desktop Gateway Manager, modify the properties of the TS_CAP_01 connection authorization
policy.
C.    From the Network Policy Server console, modify the properties of the TS_CAP_01 network policy.
D.    From the Network Policy Server console, modify the properties of the TS GATEWAY AUTHORIZATION
POLICY connection request policy.

Answer: C

QUESTION 148
Your network contains two servers that run Windows Server 2008 R2. The servers are configured as shown in the following table.

Remote users connect to Remote Desktop resources on the internal network through Server2. Internal users access Remote Desktop resources on the internal network directly. You need to ensure that the remote users’ Remote Desktop sessions are disconnected if their sessions are idle for more than 60 minutes. The internal users must not be disconnected if their Remote Desktop sessions are idle for more than 60 minutes. What should you do?

A.    From RemoteApp Manager on Server1, modify the RD Gateway settings.
B.    From Remote Desktop Gateway Manager on Server2, modify the properties of the resource authorization
policy.
C.    From Remote Desktop Gateway Manager on Server2, modify the properties of the connection authorization
policy.
D.    From Remote Desktop Session Host Configuration on Server1, modify the properties of the RDP- Tcp
connection.

Answer: C

QUESTION 149
Your network contains three servers that run Windows Server 2008 R2. The servers are configured as shown in the following table.

On Server1, you configure a virtual desktop pool named Pool1. Pool1 contains a Windows 7 virtual machine (VM) named Computer1. You need to ensure that when a user logs off of Computer1, all of the changes made to Computer1 are discarded. What should you do?

A.    On Server2, enable shadow copies.
B.    On Server2, take a snapshot of Computer1 and rename the snapshot RDV_Rollback.
C.    From the properties of Pool1 on Server1, modify the Automatically save virtual machines setting.
D.    From the Remote Desktop Session Host Configuration console on Server1, modify the Delete temporary
folders on exit setting.

Answer: B
Explanation:
To enable rollback on a virtual machine
1. Log on to RD Virtualization Host using an Administrator account.
2. Open Hyper-V Manager. To open Hyper-V Manager, click Start, point to Administrative Tools, and then click Hyper-V Manager.
3. Under Virtual Machines, right-click the virtual machine to enable rollback, and then click Snapshot.
4. Under Snapshots, right-click the snapshot of the virtual machine, and then click Rename.
5. Type RDV_Rollback and then press ENTER.
6. Close Hyper-V Manager.
7. Repeat these steps for each virtual machine.
Source: http://technet.microsoft.com/en-us/library/ff710411(WS.10).aspx

QUESTION 150
Your network contains three servers that run Windows Server 2008 R2. The servers are configured as shown in the following table.
Server1 and Server2 are members of an RD Session Host server farm named farm1.contoso.com. You configure the RD Connection Broker role service on Server3 to support farm1.contoso.com. You need to create DNS records to support RD Connection Broker load balancing. Which record or records should you create for farm1.contoso.com?

A.    One Alias (CNAME) record
B.    One Host (AAAA) record
C.    Two Host (A) records
D.    Two service location (SRV) records

Answer: C
Explanation:
Configure DNS for RD Connection Broker Load Balancing
To load balance sessions in an RD Session Host server farm, you can use the RD Connection Broker Load Balancing feature together with Domain Name System (DNS) round robin. To configure DNS, you must create a DNS host resource record for each RD Session Host server in the farm that maps the RD Session Host server’s IP address to the RD Session Host server farm name in DNS. To add DNS entries for each RD Session Host server in the farm
1. Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS snap-in has been installed, click Start, point to Administrative Tools, and then click DNS.
2. Expand the server name, expand Forward Lookup Zones, and then expand the domain name.
3. Right-click the appropriate zone, and then click New Host (A or AAAA).
4. In the Name (uses parent domain name if blank) box, type the RD Session Host server farm name.
5. The farm name is the virtual name that clients will use to connect to the RD Session Host server farm. Do not use the name of an existing server. For management purposes, we recommend that you use the same farm name that you specified when you configured the RD Session Host servers to join a farm in RD Connection Broker.
6. In the IP address box, type the IP address of an RD Session Host server in the farm.
7. Click Add Host.
Repeat steps three through six for each RD Session Host server in the farm. Source:
http://technet.microsoft.com/en-us/library/cc772506.aspx

If you want to pass Microsoft 70-643 successfully, donot missing to read latest lead2pass Microsoft 70-643 dumps.
If you can master all lead2pass questions you will able to pass 100% guaranteed.

http://www.lead2pass.com/70-643.html

Why Choose Lead2pass?