OFFER Free Microsoft 70-687 PDF and VCE Exam Dumps 41-50

Vendor: Microsoft
Exam Code: 70-687
Exam Name: Configuring Windows 8.1
Version: 14.91

QUESTION 41
You update the video card driver on a computer that runs Windows 8.1.
You can no longer configure the display settings to extend the display to a projector.
You need to restore the display options as quickly as possible and retain all user data.
What should you do?

A.    Roll back the video card driver to the previous version.
B.    Run the DisplaySwitch/extend command.
C.    Run the sic /scannow command.
D.    start the computer from the Windows 8.1 installation media and perform a system image recovery.

Answer: A
Explanation:
Rolling back the driver is the simplest and fastest solution.
Example:

Further Information:
The DisplaySwitch /extend command might not work is the driver is broken.
The sfc /scannow command checks system files for consistency.
And a system image recovery will affect the user data.

QUESTION 42
A company has client computers that run Windows 8.1.
Each computer has two hard drives.
You need to create a dynamic volume on each computer that maximizes write performance.
Which kind of dynamic volume should you create?

A.    Striped volume
B.    RAID 5 volume
C.    Spanned volume
D.    Mirrored volume

Answer: A
Explanation:
http://technet.microsoft.com/en-us/library/cc737048%28v=ws.10%29.aspx
What Are Dynamic Disks and Volumes?

Types of Dynamic Volumes
A dynamic volume is a volume that is created on a dynamic disk. Dynamic volume types include simple, spanned, and striped volumes.

Striped Volumes
Striped volumes improve disk input/output (I/O) performance by distributing I/O requests across disks. Striped volumes are composed of stripes of data of equal size written across each disk in the volume. They are created from equally sized, unallocated areas on two or more disks.
Striped volumes cannot be extended or mirrored and do not offer fault tolerance. If one of the disks containing a striped volume fails, the entire volume fails, and all data on the striped volume becomes inaccessible. The reliability for the striped volume is less than the least reliable disk in the set.

Further Information:
RAID-5 Volumes
A RAID-5 volume is a fault-tolerant volume that stripes data and parity across three or more disks. Parity is a calculated value that is used to reconstruct data if one disk fails. RAID-5 volumes are typically created by the user who requires fault-tolerance and who has at least three disks in their computer. If one of the disks in the RAID-5 volume fails, the data on the remaining disks, along with the parity information, can be used to recover the lost data. RAID-5 volumes are well-suited to storing data that will need to be read frequently but written to less frequently. Database applications that read randomly work well with the built-in load balancing of a RAID-5 volume.

Spanned Volumes
Spanned volumes combine areas of unallocated space from multiple disks into one logical volume. The areas of unallocated space can be different sizes. Spanned volumes require two disks, and you can use up to 32 disks.

Mirrored Volumes
A mirrored volume is a fault-tolerant volume that provides a copy of a volume on another disk. Mirrored volumes provide data redundancy by duplicating the information contained on the volume. The two disks that make up a mirrored volume are known as mirrors. Each mirror is always located on a different disk. If one of the disks fails, the data on the failed disk becomes unavailable, but the system continues to operate by using the unaffected disk.
Mirrored volumes are typically created by the user who requires fault-tolerance and who has two disks in their computer. If one disk fails, the user always has a copy of their data on the second disk. Mirrored volumes provide better write performance than RAID-5 volumes.

QUESTION 43
A company has client computers that run Windows 8.1.
The corporate network is configured for IPv4 and IPv6.
You need to disable Media Sensing for IPv6 on the client computers without affecting IPv4 communications.
What should you do on each client computer?

A.    Run the Disable-NetAdapterBinding Windows PowerShell cmdlet.
B.    Run the Disable-NetAdapter Windows PowerShell cmdlet.
C.    Run the Set-NetlPv6Protocol Windows PowerShell cmdlet.
D.    Run the Set-NetlPv4Protocol Windows PowerShell cmdlet.

Answer: C
Explanation:
http://technet.microsoft.com/en-us/library/hh826144.aspx
Set-NetIPv6Protocol [-DhcpMediaSense<DhcpMediaSense>]
Modifies the DHCPMediaSense property. This parameter value provides a mechanism for the network adapter to notify the protocol stack of media connect and disconnect events. These events trigger the DHCP client to take some action, such as attempting to renew a DHCP lease or removing routes related to a disconnected network. One application of Media Sense enables the network parameters on the notebook computer of a roaming user to automatically and transparently update without rebooting when the user moves from one location to another.
The acceptable values for this parameter are:
— Enabled: DhcpMediaSense set to Enabled.
— Disabled: DhcpMediaSense is set to Disabled.
The default value is Enabled.

QUESTION 44
A company has 100 client computers that run Windows 8.1.
The client computers are members of a workgroup.
A custom application requires a Windows Firewall exception on each client computer.
You need to configure the exception on the client computers without affecting existing firewall settings.
Which Windows PowerShell cmdlet should you run on each client computer?

A.    New-NetFirewallRule
B.    Set-NetFirewallSetting
C.    Set-NetFirewallRule
D.    Set-NetFirewallProfile
E.    New-NetIPSecMainModeRule

Answer: A
Explanation:
Creates a new inbound or outbound firewall rule and adds the rule to the target computer.
http://technet.microsoft.com/en-us/library/jj554908.aspx
New-NetFirewallRule
The New-NetFirewallRule cmdlet creates an inbound or outbound firewall rule and adds the rule to the target computer.

Further information:
Set-NetFirewallSetting
The Set-NetFirewallSetting cmdlet configures properties that apply to the firewall and IPsec settings, regardless of which network profile is currently in use. This cmdlet allows the administrator to specify global firewall behavior.

Set-NetFirewallRule
The Set-NetFirewallRule cmdlet modifies existing firewall rule properties.

Set-NetFirewallProfile
The Set-NetFirewallProfile cmdlet configures options for the profiles, including domain, public, and private, that are global, or associated with the input rules.

New-NetIPSecMainModeRule
The New-NetIPsecMainModeRule cmdlet creates an IPsec main mode rule. A main mode rule contains a set of local and remote end points to determine the peers to which it applies. When an application on the local computer attempts to communicate with one of these specified remote hosts, the computer attempts to establish a security association (SA) with the remote server.

QUESTION 45
A company has an Active Directory Domain Services (AD DS) domain.
All client computers run Windows 8.1 and are members of the domain. Client computers maintain a list of sites in the Internet Explorer Restricted Sites security zone. Users of one client computer are able to download and install an application from a site within the Restricted Sites zone.
You need to ensure that users of the computer can install applications only from sites that are not in the Restricted Sites zone.
What should you do?

A.    Run the Set-ExecutionPolicy Windows PowerShell cmdlet.
B.    Configure the Software Restriction Policy settings in the local Group Policy of the computer.
C.    Add the blocked application as a software restriction policy to the GPO that configures AppLocker.
D.    Run the Cet-AppLockerPolicy Windows PowerShell cmdlet.
E.    Add the blocked application as an additional AppLocker rule to the GPO that configures AppLocker.

Answer: B
Explanation:
Only Software Restriction policy allows for the control of applications from a network zone; AppLocker does not.

QUESTION 46
A company has an Active Directory Domain Services (AD DS) domain.
All client computers run Windows 8.1.
A local printer is shared from a client computer.
The client computer user is a member of the Sales AD security group.
You need to ensure that members of the Sales security group can modify the order of documents in the print queue, but not delete the printer share.
Which permission should you grant to the Sales group?

A.    Manage queue
B.    Manage this printer
C.    Print
D.    Manage spooler
E.    Manage documents

Answer: E
Explanation:
http://technet.microsoft.com/en-us/library/cc781446%28v=ws.10%29.aspx ‘
Group types
There are two types of groups in Active Directory: distribution groups and security groups.
You can use distribution groups to create e-mail distribution lists and security groups to assign permissions to shared resources.

Security groups
Used with care, security groups provide an efficient way to assign access to resources on your network. Using security groups, you can:
Assign user rights to security groups in Active Directory Assign permissions to security groups on resources

http://my.safaribooksonline.com/book/operating-systems/9780133118025/sharing- printers/ch21lev2sec24
Setting Printer Permissions

If you have a workgroup network and have disabled Password Protected Sharing, or if you have set up a homegroup, you don’t need to worry about setting permissions for printers:
anyone can use your shared printer. If you’re on a domain network or have chosen to use detailed user-level permissions on your workgroup network, you can control access to your shared printers with security attributes that can be assigned to users or groups, as shown in Figure 21.9 and described next:

The Security tab lets you assign printer-management permissions for users, groups, and the creator of each print job.

QUESTION 47
Your computer runs Windows 8 and is connected to an Active Directory Domain Services (AD DS) domain. You create a folder and share the folder with everyone in your organization.
You need to modify the NTFS permissions of the folder to meet the following criteria:

– Users from the Marketing security group must be able to open files, but not modify them.
– Users from the Supervisors security group must be able to create, modify, and delete files.

Which permissions should you set?
Users from both groups must not be able to delete the folder.

A.    Assign the Marketing group the Read permission. Assign the Supervisors group the Read and
Write permissions and the Delete Subfolders and Files special permission.
B.    Assign the Marketing group the Read and Write permissions.
Assign the Supervisors group the Full Control permission.
C.    Assign the Marketing group the Read and Write permissions. Assign the Supervisors group the
Modify permission and the Delete Subfolders and Files special permission.
D.    Assign the Marketing group the Read permission. Assign the Supervisors group the Read and
Write permissions and the Delete special permission.

Answer: A

QUESTION 48
A company has client computers that run Windows 8.1
The company implements the following security requirements:

– All client computers must use two-factor authentication.
– At least one authentication method must include exactly four characters or gestures.

You need to choose authentication methods that comply with the security requirements.
Which two authentication methods should you choose? (Each correct answer presents part of the solution. Choose two.)

A.    PIN
B.    Biometric authentication
C.    Picture password
D.    Microsoft account

Answer: AB
Explanation:
Something the user knows: PIN (4 digits)
One might be tempted to think the photo for the picture password is something the User has.
But it is something the User knows, too:
He knows how to draw the gestures (maximum 3 gestures supported with picture password), and it is no physical object (like a token, smart card …)
The MS Account is too something the user knows.
So the answer must be Biometric authentication.
Two-factor authentication requires the use of two of the three authentication factors:
Something the user knows (e.g., password, PIN); Something the user has (physical Object) (e.g., ATM card, smart card); and Something the user is (e.g., biometric characteristic, such as a fingerprint).
The factors are identified in the standards and regulations for access to U.S.
Federal Government systems.

QUESTION 49
Hotspot Question
You are setting up a Windows 8.1 computer.
The computer’s network connections are shown in the Network Connections exhibit (Click the Exhibit button.)

The computer’s network settings are shown in the Network Settings exhibit. (Click the Exhibit button.)

Advanced TCP/IP settings are shown in the Advanced TCP/IP Settings exhibit. (Click the Exhibit button,)

Consider each of the following statements. Does the information in the three screenshots support the inference as stated? Each correct selection is worth one point.

Answer:

QUESTION 50
Your computer runs Windows 8.1 and is connected to an Active Directory Domain Services (AD DS) domain.
You create a folder and share the folder with everyone in your organization.
You need to modify the NTFS permissions of the folder to meet the following criteria:

– Users from the Supervisors AD security group must be able to open files, but not modify them.
– Users from the Marketing AD security group must be able to create, modify, and delete files.
– Users from both groups must not be able to delete the folder.

Which permissions should you set?

A.    Assign the Supervisors group the Read and Write permissions.
Assign the Marketing group the Modify permission and the Delete Subfolders and Files special
permission.
B.    Assign the Supervisors group the Read and Write permissions.
Assign the Marketing group the Full Control permission.
C.    Assign the Supervisors group the Read permission.
Assign the Marketing group the Read and Write permissions and the Delete Subfolders and
Files special permission.
D.    Assign the Supervisors group the Read permission.
Assign the Marketing group the Read and Write permissions and the Delete special permission.

Answer: C
Explanation:
http://technet.microsoft.com/en-us/library/bb727008.aspx File and Folder Permissions

On NTFS volumes, you can set security permissions on files and folders. These permissions grant or deny access to the files and folders.

File and Folder Permissions:

Special Permissions for Files:

Special Permissions for Folders:

If you want to pass Microsoft 70-687 exam successfully, donot missing to read latest lead2pass Microsoft 70-687 dumps.
If you can master all lead2pass questions you will able to pass 100% guaranteed.

http://www.lead2pass.com/70-687.html

Why Choose Lead2pass?